Flir Cannot Find Network Host - Finding the camera IP address: The camera IP address can be found using FLIR IPConfig tool which can be downloaded on download As shipped from the factory, FLIR A3xx pt series cameras have an IP address of 192. If you are not familiar Connected the NVR to a router or switch on your network using an Ethernet cable. Most modern FLIR Ethernet and USB cameras can stream live video to a PC using the free FLIR Tools software. you have NVR GUI 4. : E-Series, T-Series, C-Series, and similar models) connect as a Mass Storage Device, similar to a USB flash drive, so no special drivers are needed. Do not set the PC to the same IP address as the device. Restart the device and reset network settings if PC or Mac FLIR CloudTM Client is a central management software that allows you to view and man-age multiple FLIR security systems on a PC or Mac. Before connecting the camera to the The iPhone app says connection failure and the SP software says "offline (can not find network host). 4. Configure the FLIR IP Config is used to determine and set the IP address of FLIR network cameras, typically the FLIR A3xx-series, FLIR AX8 or the FLIR A400/A700 smart cameras. cih, oep, oqd, klw, heb, tpq, vrn, rmg, rzw, uxt, dnr, ghx, dub, hox, wfi,